nxosv9k

Before posting something, READ the changelog, WATCH the videos, howto and provide following:
Your install is: Bare metal, ESXi, what CPU model, RAM, HD, what EVE version you have, output of the uname -a and any other info that might help us faster.

Moderator: mike

Post Reply
antman
Posts: 6
Joined: Tue Jul 04, 2017 7:31 pm

nxosv9k

Post by antman » Wed Oct 04, 2017 10:13 pm

I am running 2.0.3-68 on Mac Sierra running Fusion 8.5.8. I followed below:

http://www.eve-ng.net/index.php/documen ... x9k-switch

and tried to start Node but it doesn't start and after a while goes back to default non-start state. I tried both codes:

7.0(3)I5(2) <---recommend code

due to old forum below, I also tried 7.0(3)I6(1) and same problem
http://www.eve-ng.net/forum/viewtopic.p ... sv9k#p1597

Thanks

ramindia
Posts: 409
Joined: Sun Mar 19, 2017 10:27 pm

Re: nxosv9k

Post by ramindia » Thu Oct 05, 2017 4:29 pm

antman wrote:
Wed Oct 04, 2017 10:13 pm
I am running 2.0.3-68 on Mac Sierra running Fusion 8.5.8. I followed below:

http://www.eve-ng.net/index.php/documen ... x9k-switch

and tried to start Node but it doesn't start and after a while goes back to default non-start state. I tried both codes:

7.0(3)I5(2) <---recommend code

due to old forum below, I also tried 7.0(3)I6(1) and same problem
http://www.eve-ng.net/forum/viewtopic.p ... sv9k#p1597

Thanks
It was working ok, to confirm i have booted again it works ok.

Code: Select all

switch# show version 
Cisco Nexus Operating System (NX-OS) Software
TAC support: http://www.cisco.com/tac
Documents: http://www.cisco.com/en/US/products/ps9372/tsd_products_support_serie
s_home.html
Copyright (c) 2002-2017, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained herein are owned by
other third parties and are used and distributed under license.
Some parts of this software are covered under the GNU Public
License. A copy of the license is available at
http://www.gnu.org/licenses/gpl.html.

NX-OSv9K is a demo version of the Nexus Operating System

Software
  BIOS: version 
  NXOS: version 7.0(3)I6(1)
  BIOS compile time:  
  NXOS image file is: bootflash:///nxos.7.0.3.I6.1.bin
  NXOS compile time:  5/16/2017 22:00:00 [05/17/2017 06:21:28]


Hardware
  cisco NX-OSv Chassis 
   with 8160452 kB of memory.
  Processor Board ID 92H0HSJ06IO

  Device name: switch
  bootflash:    3509454 kB
Kernel uptime is 0 day(s), 0 hour(s), 3 minute(s), 36 second(s)

Last reset 
  Reason: Unknown
  System version: 
  Service: 

plugin
  Core Plugin, Ethernet Plugin

Active Package(s):
        
switch# 
i am using EVE-NG v77

R!

Uldis (UD)
Posts: 5180
Joined: Wed Mar 15, 2017 4:44 pm
Location: London
Contact:

Re: nxosv9k

Post by Uldis (UD) » Thu Oct 05, 2017 10:32 pm

On v80 it works great as well

antman
Posts: 6
Joined: Tue Jul 04, 2017 7:31 pm

Re: nxosv9k

Post by antman » Wed Oct 11, 2017 11:42 pm

yup, upgrade to v81 and it works. Thx

Post Reply